
Tom, Horsetown USA ranch home, Norco
Granite Countertop Installation
- Material
- Colonial White granite
- Size
- 45 sq ft ranch kitchen
- Est. investment
- $3,600 to $4,600
- Est. duration
- 1 to 2 days
Long ranch kitchen with two corners and a 1980s laminate top
Riverside Custom Countertops provides countertop sealing & polishing in Riverside for granite, marble, quartzite and other natural stone, so spills stay on the surface and the finish keeps its depth, whether the top is new or fifteen years old.
Natural stone is porous, and sealer is what slows liquid from soaking in before you can wipe it up. A sealed top still needs quick cleanup, but oil, wine and coffee sit on the surface long enough to be caught. Polishing is the other half: it restores gloss that cleaners and daily wear have dulled.
We seal and polish in Riverside, Norco, Corona and Woodcrest, on tops we installed and tops we did not. The first step is always a test, because some stones are already well sealed and need nothing, and we would rather tell you that than sell you a coat you do not need.
What you can hold us to

Tom, Horsetown USA ranch home, Norco
Long ranch kitchen with two corners and a 1980s laminate top
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Most natural stone needs sealing, and engineered quartz does not. Porous stones absorb liquid, while dense stones and resin-based surfaces mostly do not.

A top needs sealing when a puddle of water darkens it within a few minutes. Pour a tablespoon of water on the stone, leave it for ten minutes and wipe it off. If the spot is dark, the stone is drinking the water and the sealer has worn thin.
Run the test in several places, since the area around the sink and the cooktop wears first. Oil works the same way: a drop of cooking oil that spreads into a dark ring tells you the surface is open. We run both tests at the visit and show you the result before quoting a coat.
Sealing a kitchen in Riverside is estimated at roughly $65 to $200, and polishing is priced separately by the square foot and the condition of the stone. A clean granite kitchen that only needs a fresh coat is at the low end, while a large island with a deep clean first sits higher.
Polishing a dulled area can add to the number, and we list the sealing and the polishing as separate lines so you see each one.
Clean, test, apply penetrating sealer and buff it off
Poultice on stains, deep clean, then sealer
Spot polishing to match the surrounding finish
Whole-top polish and a final sealer coat
Cleaned and sealed, side splash included
Sealer chosen for sun and weather exposure
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
All figures here are estimates, since sealing is cheap and the surprises come from the stone's condition. We write a quote after the test, and that quote is the number you pay.
A stone with old wax or a topical coating may need the coating stripped first, which adds time. We spot that during the visit and explain it before we start.
A penetrating sealer soaks into the pores and leaves the stone feeling like stone, while a topical sealer builds a film on top. We use penetrating products on countertops, because a film wears, yellows and can look plastic, especially at the sink.
Penetrating sealers differ in how long they last and how much oil they resist, so we match the product to the stone. A porous honed marble gets a different sealer than a dense polished granite, and a sealer that works on one can leave a haze on the other.

Polish restores gloss and sealer restores protection, and one does not replace the other. A top can shine and still absorb a spill, and a top can be sealed and look dull.
Etching, where acid has eaten the polish, is damage a sealer cannot prevent, so a marble owner often needs both. If your goal is to erase etch marks and refresh the shine, see our countertop refinishing work, which goes deeper than a polish pass.
Outdoor stone needs a sealer made for sun and weather, and a coat that suits a kitchen can break down on a patio. Riverside sun is strong enough to wear down a sealer faster, so outdoor tops get tested more often. Our outdoor kitchen countertops are sealed with that in mind, and we reseal older patio tops on request.
Grease from a barbecue is the main enemy outdoors, so wipe grease before it dries and keep cooking oil off the stone where you can.

The easiest way to make a seal last is a pH-neutral cleaner and a soft cloth. Harsh sprays with vinegar, citrus or bleach break sealer down and, on marble, etch the surface in a single use.
Wipe spills within a few minutes, use a trivet for hot cookware, and put a mat under the dish rack where water sits. A stone that is cared for this way may need resealing less often than the schedule says, and the water test is the real answer.
Sealer cannot make stone stain-proof, only stain-slow. A coat buys you minutes to wipe up a spill, not days, and it does nothing against acids that eat polished stone. Scratches and chips are also outside its reach, since those are damage to the stone itself.
If a top has lost its shine from etching or heavy wear, sealing alone will not bring it back, and we tell you that at the test. Setting honest expectations at the start is how we avoid a second visit for the same complaint.
Our crew seals granite countertops, marble tops and quartzite slabs, and we reseal tops we did not install. We do not seal quartz, and we tell you so, because a coat on a resin surface does nothing but cost you money.

We fabricate and install the stone we seal, so we know how it was finished and what it needs. A seal applied by the crew that sets your top is covered by our 1-year workmanship warranty.
We work around Norco, Corona and Eastvale, and a seal visit is quick enough to book alongside any other work.
Most granite needs sealing every 1 to 2 years, and the water test tells you when yours is due.
Sealing a kitchen is estimated at roughly $65 to $200, and your written quote sets the final number.
No, engineered quartz has no pores, so sealing it does nothing.
No, sealer slows staining but acids still dull polished marble, which is why a honed finish helps.
You can use the counter within hours, and full protection typically comes in 24 hours.
Yes, we polish stone with fine pads and compound, and we show a test spot before doing the full top.
A penetrating sealer can deepen the color slightly, and we test a small area first if you want to preview it.
Yes, we seal and polish natural stone of any age, after running the water test.
Request a free estimate, and we will test your stone, tell you what it needs and give you a clear quote for sealing and polishing.



Start to finish
We run water and oil tests to see how open the surface is.
We deep clean the top and treat any stains before sealer goes on.
Penetrating sealer is applied, left to soak and buffed off.
We polish dull spots and give you a simple care schedule.
Where we work
Call us or send the form, and we will book a site visit and a laser template.
Calls only, we do not receive text messages.