Skip to content

Countertop Refinishing & Resurfacing in Riverside, CA

Riverside Custom Countertops provides countertop refinishing & resurfacing in Riverside for tired stone and solid surface tops by honing, repolishing and removing etch marks, stains and scratches, and we tell you plainly when a top has gone past what refinishing can do.

Get a free countertop estimate

Bring a Worn Top Back Without Tearing It Out

Refinishing is the right move when the stone is sound and only the surface has dulled, etched or scratched. Years of cleaners, hot pans and sun wear the polish down, but the slab underneath is usually fine. A refinish removes the damaged skin of the stone and brings out a fresh finish, for a fraction of what a new top costs.

Resurfacing is a different job, and the line between the two matters. We refinish natural stone and solid surface in Riverside, Norco, Corona and Woodcrest, and we are upfront about materials that cannot be refinished at all, because a promise that does not hold up wastes your money.

What you can hold us to

What Stands Behind a Refinish

12 yearsCutting and installing stone from our Riverside shop
1,870Kitchens, islands, bars and commercial tops completed
1-year1-year workmanship warranty on seams, fit and sink mounting
35 milesFrom Riverside to Yorba Linda, Villa Park and Chino Hills

A Granite Ranch Kitchen in Norco

Long ranch kitchen with white granite counters flecked in burgundy, knotty wood cabinets, a farmhouse sink and a window over pasture

Tom, Horsetown USA ranch home, Norco

Granite Countertop Installation

Material
Colonial White granite
Size
45 sq ft ranch kitchen
Est. investment
$3,600 to $4,600
Est. duration
1 to 2 days

Long ranch kitchen with two corners and a 1980s laminate top

Investment and duration figures are estimates. Your written quote sets the final price and schedule.

What Refinishing Can and Cannot Fix

Refinishing fixes surface damage, not structural damage. Whether it works depends on the material and on how deep the problem goes.

  • Etch marks on marble and limestone: acids eat the polish, and honing then repolishing restores the shine.
  • Dull, worn granite: a polish pass brings back depth, especially around the sink and the stove.
  • Light scratches: fine abrasives smooth them out on stone and on solid surface.
  • Stains: a poultice can draw oil and rust out of porous stone, though old deep stains may fade without vanishing.
  • Deep chips and cracks: these need a repair first, and the refinish follows.
  • Engineered quartz: the surface is a resin finish and cannot be honed back the way stone can.
White quartz island top with soft grey veining in front of a sage-green cabinet base, with a window and gold faucet over the sink on the far wall

Refinishing vs Resurfacing: What Each Word Means

Refinishing restores the finish of the stone you already have, while resurfacing replaces or covers the surface with something new. We use the word refinishing for honing and polishing, since that is work we do in your kitchen with real stone tools.

Coating or painting over a worn top is a different product, and we do not sell it as a permanent fix. A coating sits on the surface and wears through at the sink and the stove first. If a top is too damaged to refinish, we show you a replacement quote and let you decide.

What a Refinish Visit Covers

Inspection
Surface checked with a raking light to find etching, scratches and low spots before a price is given
Cleaning
Stone cleaned and degreased so the abrasive does not push dirt into the surface
Honing
Diamond pads step from coarse to fine to remove etch marks and scratches
Polishing
Final pads and polishing compound bring back the gloss or leave a honed finish, your choice
Stain treatment
Poultice applied to draw out oil, rust or food stains where the stone allows
Sealing
Impregnating sealer applied after the polish on natural stone
Protection
Cabinets, floors and appliances masked, and the water kept contained
Cleanup
Slurry wiped and vacuumed before the crew leaves

Countertop Refinishing Cost in Riverside

Countertop refinishing in Riverside is estimated at roughly $4 to $12 per sq ft, and the stone, the depth of the damage and the finish you want move the price most. A light polish on granite is at the low end, while removing deep etching from marble sits at the high end.

Most kitchens land at an estimated $300 to $1,000, which is why refinishing is worth asking about before you replace anything.

Granite polish and reseal (30 to 45 sq ft kitchen)

Est. investment
$300 to $800 per kitchen
Est. duration
3 to 5 hours

Full-surface polish, light scratch removal and a fresh coat of sealer

Marble etch removal and repolish

Est. investment
$350 to $1,000 per kitchen
Est. duration
4 to 6 hours

Honed back past the etching, then polished or left honed

Solid surface scratch and burn sanding

Est. investment
$250 to $700 per kitchen
Est. duration
3 to 5 hours

Sanded through grits to a matching matte or gloss finish

Single stain removal with poultice

Est. investment
$100 to $300 per stain
Est. duration
1 to 2 visits

Poultice applied, dried and removed, then the spot resealed

Bathroom vanity top refinish

Est. investment
$150 to $400 per top
Est. duration
1 to 2 hours

Polish and seal on a single or double vanity top

Island top hone and polish

Est. investment
$200 to $600 per island
Est. duration
2 to 3 hours

Full-surface refinish of one island, edges included

Investment and duration figures are estimates. Your written quote sets the final price and schedule.

These figures are estimates. We look at the surface, then write you a quote, and that written quote is what you pay. Surface damage that turns out deeper than it looked may change the number, and we tell you before any work starts.

Etching on marble is the most common reason people call, and the cost climbs with how long the acid sat. A fresh ring from a lemon is quick, while years of splashed cleaner across the whole top is a full-surface job.

How Honing and Polishing Actually Work

Honing grinds a thin layer off the stone, and polishing then brings the shine back to what is left. We start with a coarse diamond pad to level out the etch marks, move through finer pads and finish with a polishing compound. Each step removes the scratches the last one left, so skipping a grit shows up as hazy streaks later.

Because the process uses water to keep dust down, we mask the cabinets and cover the floor first. The stone looks wet and dull halfway through, and the shine only returns on the last pass, so do not judge it until it is finished.

Speckled cream granite island top with a thick edge, three upholstered stools, glass pendant lights and a stainless range behind

Honed or Polished: Choosing the Finish

A honed finish hides etching and fingerprints better, while a polished finish shows color and pattern more strongly. On marble and limestone many owners choose honed after a first etching, because it makes future marks nearly invisible.

Granite is almost always put back to a gloss. Tell us which finish you want before we begin, since going from polished to honed is simple, but a fine polish after a heavy hone takes extra passes.

Keeping a Refinished Top Looking New

A refinished top stays fresh when you protect the surface from the thing that damaged it. Wipe acids such as lemon juice, wine and vinegar quickly, use a pH-neutral stone cleaner and put a trivet under hot cookware. For natural stone, a good sealer keeps spills from soaking in while you clean up.

We cover sealing in more detail on our countertop sealing and polishing page, and a yearly water test tells you when the sealer needs refreshing.

Calacatta-look quartz island with a waterfall end dropping to the oak floor, four stools, pendant lights and an open living room beyond

When Refinishing Is Not Enough

Refinishing cannot help when the top is cracked through, lifting off the cabinets or badly chipped at the sink edge. In those cases a countertop repair may save the stone, and if the damage is widespread, countertop replacement is the honest answer.

A refinish also cannot change a color you have grown tired of. If you want a different look, we price a new top next to the refinish so you see both numbers side by side.

What to Do Before Our Crew Arrives

Clear the counters completely, and tell us about any product you have used on the stone. Wax, oil-based polish and sealer left from a past cleaning attempt can block the abrasive, so we need to know what is on the surface.

Move small appliances and rugs out of the work area, and keep pets and children out of the kitchen while we hone, since the slurry is slippery. Most owners are surprised how little else is needed, because we bring water control, masking and vacuums with us.

Stone Types We Refinish Most

We refinish granite, marble and quartzite often, and solid surface when the top is still in good shape. Each stone reacts differently to honing, so we test a small corner first and show you the result before touching the whole top.

White quartz counter with an undermount sink and a waterfall end, grey stools, stainless range and white subway tile in a bright kitchen

Why Riverside Homeowners Call Us for Refinishing

We cut and install stone in our own shop, so we know how a slab was finished at the start and how to match it. Our work carries a 1-year workmanship warranty, and a refinish is done by the same crew that sets new tops.

We serve Norco, Corona, Woodcrest and the Riverside neighborhoods in between, so most refinishing visits are same-week.

Countertop Refinishing Questions From Riverside Homeowners

Can you remove etch marks from marble?

Yes, honing and repolishing removes most etching, and a honed finish makes new marks much harder to see.

How much does countertop refinishing cost in Riverside?

Refinishing is estimated at roughly $4 to $12 per sq ft, and most kitchens run an estimated $300 to $1,000 on the written quote.

Can quartz be refinished?

Not in the way stone can, because quartz has a resin surface, so we look at repair or replacement for damaged quartz.

How long does a refinish take?

Most kitchens take 3 to 6 hours in a single visit, and the top can be used again once it has been cleaned and sealed.

Will refinishing remove a stain?

Often, with a poultice on oil and rust stains, though old deep stains may lighten instead of vanishing.

Is refinishing cheaper than replacing?

Yes, when the stone is sound, a refinish costs a small share of a new top.

Do I need to move out during the work?

No, but we need the counters cleared and the kitchen free for several hours while we hone and polish.

Should I reseal after refinishing?

Yes, natural stone gets a fresh coat of sealer right after the polish, so it resists new stains.

Book Your Refinishing Estimate

Request a free estimate, and we will look at the surface, test a small spot and tell you whether refinishing is worth it.

Stone, Edges and Finishes

Start to finish

How a Refinish Gets Done

  1. Inspect the surface

    We look over the whole top with a raking light and test a small corner.

  2. Agree the finish

    You choose honed or polished and approve the plan and price.

  3. Hone and polish

    We work through diamond pads in steps, masking everything around the top.

  4. Seal and walk through

    We seal natural stone, clean up and go over the result with you.

Free estimate

Ready to Talk About Countertop Refinishing?

Call us or send the form, and we will book a site visit and a laser template.

Call (951) 441-2673

Calls only, we do not receive text messages.

Call (951) 441-2673