Riverside Custom Countertops works as Riverside County's top-rated team in stone countertops for ranch homes, specializing in polished granite kitchens, sealed outdoor kitchen granite, and seam layouts for long L-shaped runs. We offer laminate tear-out and wet bar tops.
Our team provides on-site laser templating, delivering wipe-clean surfaces for homes and hard-working counters for both residential and commercial projects. With 12 years in business behind us and a 1-year workmanship warranty on seams, fit and sink mounting, we've completed over 1,870 projects, from a single bar top beside a tack room to multi-unit apartment turnovers.
From seam placement over cabinet partitions to the haul-away of 1980s laminate, our team handles every detail. Serving Norco and neighboring Corona, Eastvale and Riverside, we plan around horses, gates and long ranch runs so every slab lands where it belongs.
Request a free estimate, and we will come out to your property, gate code and all, to laser template the kitchen.
Linda, horse-keeping lots off Norco Drive, Norco
Patio kitchen beside an arena, open to dust and full sun
Tom, Horsetown USA ranch home, Norco
Long ranch kitchen with two corners and a 1980s laminate top
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
What you can hold us to
Linda's patio kitchen sits on one of the horse-keeping lots off Norco Drive, beside an arena where dust and full sun hit the counter every day. She asked about quartz, and we steered her to polished Steel Grey granite instead, because quartz resin can fade in direct sun. The outdoor kitchen with bar seating was an estimated $2,200 to $2,800 job, typically 1 to 2 days of install, and the sealed granite top now wipes clean after a dusty day.
Tom's Horsetown USA ranch home had a 45 sq ft ranch kitchen with two corners and a 1980s laminate top that had swollen at the sink. We placed both seams over cabinet partitions, well away from the sink and the cooktop, and set Colonial White granite throughout, an estimated $3,600 to $4,600 project with an estimated 1 to 2 days on site.
Norco is a city built around animal keeping, and its charter protects horse trails, lot sizes and animal-keeping rights, so most homes here sit on large horse-keeping lots with barns, arenas and long drives. That changes the countertop job in three ways.
First, dust. Arena dirt and hay dust settle on every outdoor surface and drift into kitchens through the back door, so we favor sealed granite and quartz over porous or grout-lined tops. Second, the kitchens are long: the single-story ranch homes that went up after Norco incorporated in 1964 often have 40 ft or more of counter with two or three corners, so where the seams fall matters more than in a compact tract kitchen. Third, the city asks for a rustic, Western look, and many Norco owners match that inside with honed or leathered granite in browns and greys instead of bright white quartz.
Hot summers that pass 100 on the worst days and Santa Ana winds in October and November finish the story for patio work: an outdoor counter here should be granite, sealed at install.
Most Norco kitchen countertop replacements are estimated at roughly $2,100 to $4,800 for a 30 to 45 sq ft kitchen, and longer ranch layouts with extra corners sit toward the top of that range. Outdoor kitchens on horse properties are priced separately from the house.
| Norco job | Est. investment | Est. install time |
|---|---|---|
| Kitchen countertop replacement (30 to 45 sq ft) | Est. $2,100 to $4,800 per kitchen | Est. 1 to 2 days |
| Outdoor kitchen granite tops | Est. $1,400 to $2,800 per outdoor kitchen | Est. 1 to 2 days |
| Wet bar or home bar top | Est. $750 to $2,400 per bar top | Est. 3 to 5 hours |
| Kitchen island top | Est. $1,600 to $3,400 per island top | Est. 3 to 6 hours |
| Old countertop tear-out and haul-away | Est. $150 to $500 per project | Est. 2 to 5 hours |
Granite, the stone most Norco owners pick, typically runs $55 to $135 per sq ft installed and is sealed every 1 to 2 years. The edge profile adds to that: an eased edge is included, while half-bullnose, ogee and mitered drop edges are priced per linear foot.
Every figure here is an estimate for Norco and is subject to change. The written quote we hand you after the laser template sets the final price and the install schedule, and it depends on the slab, the number of corners and the edge you choose.
Granite countertops for Norco kitchens are our most common job here, followed by quartz slab countertops inside the house, where sun and arena dust do not reach. For a rustic look on a bar or patio, some owners ask about custom concrete countertops, which we seal before they go into service.
A seam over the dishwasher or beside a cooktop is the most common mistake we see in older Norco kitchens, because that is where people lean and where heat cycles every day. We place seams over cabinet partitions, keep them hairline at under 1/16 in., and fill them with color-matched epoxy. Undermount sinks are mechanically mounted with clips and epoxy, not silicone alone, and 3cm slabs go straight onto the cabinets, while 2cm stone gets a plywood sub-top.
Our crews know horse property: we ask about gates, loose animals and the carry path from the truck before the install day, and we bring 2 to 3 installers per kitchen. The same crew that templates your kitchen sets it, and our 1-year workmanship warranty on seams, fit and sink mounting covers every top.
We cover all of Norco, from the trail-lined streets near Lake Norconian and Norco College to the Norco Hills, and our trucks reach the city in minutes from Interstate 15. Nearby we also install in Corona kitchens, Eastvale homes the equestrian lots of Woodcrest and San Bernardino foothill homes, with the full list on our areas we serve page.
Norco owners often add an outdoor kitchen BBQ countertop by the arena or a countertop replacement upgrade for a dated ranch kitchen, and some finish the job with a full-height slab backsplash.
Most Norco kitchens are estimated at roughly $2,100 to $4,800, and your written quote sets the final price after the laser template.
We do not recommend it, because quartz resin can fade in direct sun; Linda's patio kitchen went granite for that reason.
Yes, we confirm gates, animals and the carry path before install day so the crew never leaves a gate open.
Most installs take an estimated 1 to 2 days on site, with lead time typically 1 to 3 weeks after the template.
We place them over cabinet partitions, away from the sink and cooktop, as we did in Tom's ranch kitchen.
Yes, tear-out and haul-away is typically estimated at $150 to $500 and shows on the written estimate.
Book a free site visit, and we will template your Norco kitchen or patio and give you a written, itemized quote.
Your local contact
Names, photos and stories are on our about page.
Location manager covering Norco
Runs the Norco schedule from the first site visit to install day.
Where we work
Call us or send the form, and we will book a site visit and a laser template.
Calls only, we do not receive text messages.
