
Tom, Horsetown USA ranch home, Norco
Granite Countertop Installation
- Material
- Colonial White granite
- Size
- 45 sq ft ranch kitchen
- Est. investment
- $3,600 to $4,600
- Est. duration
- 1 to 2 days
Long ranch kitchen with two corners and a 1980s laminate top
Riverside Custom Countertops provides bathroom vanity top installation in Riverside, using granite, quartz, marble and quartzite, for single sinks, double sinks and floating cabinets, with every faucet hole and sink cutout made to fit your fixtures.
A custom vanity top fits your cabinet to the sixteenth of an inch, which a stock top rarely does. Bathrooms are where walls run out of square, where a 30 in. cabinet sits beside a tub, and where one faucet hole in the wrong place ruins the whole top. We template the room, cut the stone in our shop and set it in a single visit.
Most vanity tops are small enough to come from a kitchen leftover, which keeps the price low. Our crew works across Riverside, Norco, Corona and Woodcrest, and we bring the sink, the faucet and the cabinet measurements into the template so the top drops onto the base and the plumber has nothing left to guess.
What you can hold us to

Tom, Horsetown USA ranch home, Norco
Long ranch kitchen with two corners and a 1980s laminate top
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
Three layouts cover almost every bathroom we measure: single sink, double sink and wall-hung floating vanities. Each one changes how the stone is cut and how it is supported.
We confirm the layout on the template visit and mark every cutout on the stone before the saw starts.

A vanity template starts with the cabinet, not the wall. We measure the cabinet footprint, the wall-to-wall width and the distance to the nearest door swing, then mark the faucet center and the sink location on the template itself. A standard cabinet depth is about 21 to 22 in., and the top overhangs the front by roughly 3/4 to 1 in.
Walls in older Riverside homes are seldom straight, so we scribe the back edge of the stone to the wall and leave a small gap for caulk. If a wall bows, the side splash is cut to follow it. That is why we template in person and do not size a top from a drawing.
A bathroom vanity top in Riverside is estimated at roughly $250 to $1,800, and the width, the stone and the number of cutouts set the price. A 30 in. single top cut from a remnant sits at the low end, while a 72 in. double top in a busy marble sits at the high end.
Edge profiles, a second sink and a full backsplash each add to the figure, so we list them on a written quote after the template instead of guessing in advance.
Leftover slab piece, one undermount cutout, eased edge and side splash
Stone you pick from the yard, one cutout and a 4 in. splash
Two undermount cutouts, two faucet drillings and seam planning if needed
Wall-hung top with steel brackets checked against the blocking behind the drywall
One faucet hole, no sink cutout, polished edges
Removed, bagged and hauled away with the install
Investment and duration figures are estimates. Your written quote sets the final price and schedule.
| Stone | Est. price per sq ft installed | Where it fits in a bathroom |
|---|---|---|
| Granite | Est. $55 to $135 | Hard surface for guest baths and kids' baths |
| Engineered quartz | Est. $65 to $145 | Low upkeep, no sealing, steady color |
| Marble | Est. $80 to $195 | Soft look for primary baths, best with care |
| Natural quartzite | Est. $85 to $185 | Marble look with a harder surface |
These prices are estimates. The final number comes from the written quote we hand you after the visit, and a vanity top is small enough that the cutouts often cost more than the stone itself.
Quartz is the easiest bathroom stone to live with, because it never needs sealing and shrugs off toothpaste, hair dye and nail polish remover. Granite is the next easiest and adds more natural pattern. Marble looks the best and etches the fastest, since acids in cosmetics and cleaning sprays dull a polished surface within weeks.
If you want marble and still want a calm life, a honed finish hides etching better than polished. Quartzite is the pick when you want a marble look and a harder top. We show you samples under bathroom light, which is warmer and dimmer than a showroom, before you commit.
The sink cutout is the riskiest cut on a vanity top, so we cut it to the template that ships with your sink and not from memory. An undermount sink hangs from beneath and needs a polished cutout edge, while a drop-in sits on a rim and needs less polishing. Vessel sinks need no cutout, only a faucet hole in the right spot.
Faucet holes are drilled in the shop, never on site, so the stone does not chip at the edge. We check the faucet spread against the sink bowl, because a widespread faucet needs more room behind the bowl than a single-hole one. Bring the model number and we match it before the stone is cut.

A remnant is the leftover piece of a slab after a kitchen is cut, and a single vanity top fits inside one easily. We keep a rack of granite, quartz and quartzite pieces in the shop, and a remnant top is estimated to run noticeably below a full-slab top. The catch is a smaller choice of colors, which changes weekly with what the shop is cutting.
Tell us the width you need and we match it to the pieces on hand. If nothing fits, we cut from a full slab and quote that price instead.
Daily care for a stone vanity top is warm water and a soft cloth, plus a pH-neutral cleaner when it needs more. Keep products with citrus, vinegar or bleach off marble, and wipe up perfume, toner and hair dye straight away. Set a tray under bottles that live on the counter, so rings do not form.
Granite and quartzite are sealed on install day, and the water test tells you when it needs doing again: if a drop darkens the stone in a few minutes, reseal. Quartz needs only soap and water. A top that is cared for this way lasts the life of the house, and we cover the install with our workmanship warranty.

Replacing a vanity top without replacing the cabinet is one of the quickest bathroom upgrades, and the job usually takes a few hours. The old top is cut free from its caulk, the plumbing is disconnected, the new stone is set and the sink goes back in. If your cabinet base is solid and level, you keep it and pay only for the stone.
When the cabinet is water damaged, the front is sagging or a floating base needs new blocking, we say so at the template visit. A heavy stone on a weak base fails, so we would rather fix the base first than set a new top on a problem.
Homeowners who redo a bathroom top often want matching work elsewhere, such as quartz countertops for the kitchen, marble tops for a primary suite or a slab backsplash that carries the same stone up the wall. We can fabricate several pieces from one slab so the colors match from room to room.

Our crew templates, cuts and installs your vanity top ourselves, so the person who measured is the person who sets it. We carry a 1-year workmanship warranty on seams, fit and sink mounting, and every top is cut in our own Riverside shop.
We serve homes around Norco, Corona and Eastvale, so a small job does not mean a long wait for a quote.
A vanity top is estimated at roughly $250 to $1,800 depending on width, stone and cutouts, and the final number is whatever the written quote says once we have been in your bathroom.
Yes, if the cabinet is solid and level, we template the existing base and replace only the top.
Quartz is the lowest upkeep and granite is the next easiest, while marble looks best and etches fastest.
Yes, the sink and faucet holes are cut in our shop to your sink template, so the top arrives ready to set.
Most installs finish in 2 to 5 hours, and the stone is usually ready a couple of weeks after we measure.
Often yes, if both tops come from one slab lot, and we show you the pieces before you order.
Yes, and we check the wall blocking and bracket spacing at the template visit, since the wall carries the whole load.
Yes, tear-out and haul-away can be added to the job, and it is estimated at $75 to $200 per top.
Request a free estimate and we will visit, template your vanity and write an itemized quote for the stone, cutouts and edge.



Start to finish
We template the cabinet and wall and mark the sink and faucet on it.
You choose a remnant or a full slab and approve the cutout layout.
The top is cut, edged and drilled in our Riverside shop to your fixtures.
We set the top, mount the sink and seal the stone before we leave.
Where we work
Call us or send the form, and we will book a site visit and a laser template.
Calls only, we do not receive text messages.